==HSDPA Huawei E160g== '''Note:- If you intend to use this device with Intrepid Ibex Ubuntu Version 8.10 due to be released at the end of October 2008 you need not follow any of the steps below. The new version of the Network Manager supports Mobile dialup connections from the Network Manager icon itself on your desktop''' '''Step 1''' Your modem is supplied as a package, included in it is the USB modem itself the SIM card and the phone number to use. At the moment the USB Modem device has no credit associated with it which will be needed for continued Internet operation. '''Step 2''' Remove the SIM card from the package the USB Modem came with and insert this into your own mobile phone, yes thats right your own mobile phone not the USB Modem (Not Yet at any rate). '''Step 3''' Go to the following web page [https://my3.three.co.uk/mysecurity/register.do https://my3.three.co.uk/mysecurity/register.do]. You need to do this first with the SIM card in the Mobile phone, at present you do not have a password to validate a voucher or login to your "my3" account. Filling the details on this page will send a text message to the SIM card in the phone this will be your login password for your USB Mobile phone Number, be certain to write this down when you receive it, this is very IMPORTANT. '''Step 4''' Now go to the following page [http://three.co.uk/my3 three.co.uk/my3] armed with your password enter the digits that correspond to the USB Modem device '''BUT with the SIM card still in your own phone''', enter into the relevant box the password emailed to the USB Modem Phone No via your own mobile phone. '''Step 5''' At this point we recommend you purchase a '''three mobile voucher''' at the moment it is not suitable for use with USB Modem, the voucher itself needs to be converted however the process is well documented through your my3 page

[Dialer Defaults for wvdial.conf]

Phone = *99#
#Phone = *99***1# #Not required
Username = 07723777777 #= USB Mobile Phone No
Password = woiuFF #= password as set by three
Stupid mode = 1
Dial Command = ATDT

[Dialer hsdpa]
Modem = /dev/ttyUSB0
Baud = 460800
Init1 = ATZ
Init2 = ATE0V1&D2&C1S0=0 +IFC=2,2
ISDN = 0
Modem Type = Analog Modem
Init3 = AT+CGDCONT=1,"IP","three.co.uk";